Home » My Bikes

My Bikes

by Jeff Kendall-Weed

All of my bikes are available at Jenson USA!

See my Jenson USA rider profile. FYI, this page uses affiliate links. At no extra cost to you, I earn a small commission for any sales I refer to these venders. Thanks in advance!

The Yeti SB130 Lunch Ride has been an absolute treat of a bike- to the point that we bought one for my wife to complement her Ripmo!

Yeti SB130 Lunch Ride, size medium:

The Orbea Occam is a 150mm travel (in this configuration) trail bike that compares nicely to bikes in the 120-130 range. This is done through some shorter, steeper geometry, and the end result is a bike that performs where many others might not- tight, rough, natural terrain.

The 2022 Orbea Occam LTD, size medium:

My Ripley AF, set up for sending it moderately.

2021 Rocky Mountain Altitude C90 Rally Edition, size medium (I’m 5’8″).  Check out my video about this bike here.

2020 Ibis Mojo HD5

One year of shredding on this bike and it’s got a special place in my quiver! Full video about my experiences with this bike here.

Mojo HD5, size medium, spoiled diaper color http://bit.ly/IbisHD5JKW;

2019 Ibis Ripmo AF

I’ve been spending gobs of time on my Ripmo AF in an attempt to keep my Carbon V2 as cherry as possible. That’s right- the AF is soooo close in ride quality to the V2 that I’m “saving” my V2 and enjoying my time on the metal bike instead. Full video about that here!

Build: Fox PX2 Factory rear shock, Size medium, Cane Creek 40 series headset, 2020 Trust Shout fork, PNW Components Range 45mm stem, PNW Components KW handlebars, cut to 765mm, PNW Loam grips, PNW Loam lever, Industry 9 Enduro 305 wheelset (Hydra hubs, I9 aluminum rims), Shimano SLX M7100 drivetrain, 165mm cranks, 32t ring, 10-51 cassette, E13 chainguide, Shimano SLX M7120 brakes, 180mm rotors front and rear , PNW Components Bachelor 170mm post, WTB Volt 142 Team saddle, WTB Vigilante 29 x 2.5 front tire TCS Tough High Grip, WTB Judge 29 x 2.4 rear tire TCS Tough Fast Rolling

2020 IBIS RIPMO 2 

The Ripmo Carbon V2 is a dang good bike. If that link is discontinued, try this one or this one. Perhaps my favorite in my quiver. This bike is the most “do it all” bike Ibis has made. Check out my video about the Carbon V2 here.

Build: Size medium, Fox DPX2 Factory rear shock, .8 volume spacer, Cane Creek 40 series headset, FOX 36 160mm Grip2 with 44mm offset, PNW Components Range 45mm stem, PNW Components KW handlebars cut to 760mm, PNW Loam grips, PNW Loam lever, Industry 9 Enduro 305 wheelset (Hydra hubs, I9 aluminum rims), Shimano XTR M9100 drivetrain, 165mm cranks, 32t ring, 10-51 cassette, E13 chainguide, Shimano XTR M9120 brakes, 180mm rotors front and rear, PNW Components Bachelor 200mm post, WTB Pure Team saddle, WTB Vigilante 29 x 2.5 front tire TCS Tough High Grip, WTB Judge 29 x 2.4 rear tire TCS Tough Fast Rolling

2020 CHROMAG STYLUS 

This little whippet is an absolute hoot to ride. I LOVE having this as an option in the stable. Not only is it a very well made bicycle, but the riding experience is very different from the carbon full suspension bikes. Check out the build video here

Build: Size medium Chromag Stylus in “dreamer” color, Trust Message fork, Cane Creek 40 series headset, PNW Components Range 45mm stem, PNW Components KW handlebars – cut to 760mm, PNW Loam grips, PNW Loam lever, Industry 9 Enduro 305 wheelset (Hydra hubs, I9 aluminum rims), Cush Core 27.5 Pro, WTB Vigilante 2.6 TCS Light High Grip front tire, WTB Trailboss 2.6 TCS Tough Fast Rolling rear tire, Chromag Trailmaster saddle, PNW Components Bachelor 200mm post, Shimano XT M8120 brakes, 180mm rotors front and rear, Shimano XT M8100 drivetrain, 165mm cranks, 32t chainring, 10-51 cassette , E13 chainguide

 2017 Inspired Hex 26″ trials bike

Build: Inspired frame, fork, stem, bars, WTB Asym i35 rims, tubeless, Cush Core 26” tire inserts, WTB Vigilante 26 x 2.3 TCS Tough High Grip tires, PNW Loam Grips, Race Face seat post, WTB High Tail Pro saddle, Stock drivetrain, cranks, freewheel, tensioner, Spank Spike pedals, Hope trials brakes

2007-ish Transition Bank dirt jump/4x/pump track bike

Build: Size medium, X-Fusion Slant 34 fork 100mm travel, Industry Nine Hydra wheelset, Maxxis Ikon front tire tubeless, Maxxis DTH rear tire tubeless, Cush Core 26” tire inserts, Shimano Saint 10 speed drivetrain, 165mm cranks, Shimano Saint gen 1 pedals, WTB Pure Pro saddle, PNW Components Range stem, PNW Components Range handlebars, PNW Loam grips