#keeppedaling #workhardriderharder #myi9

Check out Industry Nine over at Jenson USA (affiliate JKW link!): http://bit.ly/IndustryNineJKW

Podcast with Jacob McGahey, Industry Nine vice president: https://podcasts.apple.com/us/podcast/kendall-vs-kendall-ep-10-sea-otter-classic-jacob-mcgahey/id1386409671?i=1000435311459

Industry Nine Torch vs Hydra hubs - how are they different on the trail?

What’s up guys! Some of you might be obsessed with fast engaging hubs. Me? Well, I’m going to admit something here- I’ve never been much of an “engagement snob”. And today, I want to test the new Industry Nine Hydra hub against the older I9 Torch hub.

What is hub engagement? Bikes have evolved from the historical fixed gear designs, which meant that the pedals were always moving in conjunction with a wheel. Sometimes the pedals were on the front wheel, like on a Pennyfarthing, and sometimes they were connected with a chain to the rear wheel, like the fixie bikes that the kids ride in the big cities.

For all of us single track connoisseurs, well thank goodness, we have evolved to where bikes are now, with a ratcheting system that allows the rear wheel to spin independently of the pedals. This system is possible with what we call a free hub, or free wheel, that’s built into the bike’s rear wheel. Most ratcheting systems have a small bit of free play between starting a pedaling motion and actually driving the bike forwards. This free play is the result of the drive pawls of the ratchet needing to span the distance between the teeth they engage to then drive the bike forwards.

I started thinking about how I could do a test to see how noticeable engagement actually is. With the new Hydra hub design, everyone has been talking about engagement, so this should be a cool way to bring the tech into a real-life application and see how it feels in the dirt!

My idea for today is to try some weird rock line stuff that doesn’t have a ton of space to really mash on the pedals. Theoretically, this will be the spot where higher engagement will be most noticeable.

On the Hydra, Industry Nine used some very clever engineering to turn a potential problem into a huge benefit. Jacob told me about this during our podcast at Sea Otter, and I think it’s a genius idea. On just about any hub that uses a traditional pawl/engagement tooth design, If you ever go to pedal and you hear a loud “clang” slightly after you started pedaling, well, that’s because a pawl or two that didn’t engage fully when you first started pedaling and finally slammed into place once. Bikes flex quite a bit, and even with a modern through axle, hub axles can flex. When they flex enough, only one (or two) pawls can engage. If there is too much flex, then a lone pawl can rip out of the freehub body, and ruin the drive ring and the hub as a whole. This has sent me OTB and I’ve even DNFd races after such failures!

The Hydra design is super clever. It is intentionally designed so that only one pawl engages initially. Then the following (and not-yet-engaged) pawls are designed to be able to flex enough to seat themselves fully. This is why 690 engagement teeth are more reliable than say, 24 really big teeth. The Hydra pawl that is snapping late into its engagement tooth will have a lot less force on it when it travels that small distance and finds its home. This also means that the slightly softer engagement will be more forgiving on low traction environments. That’s a super cool strategy!

Big thanks to Industry Nine for their support this

Big thanks to these guys for making this all possible! Any purchases from these links will directly help support this series as well:

Jenson USA: http://bit.ly/JensonJKW
Industry Nine: http://bit.ly/IndustryNineJKW
PNW Components: http://bit.ly/PNWComponentsJKW
Kitsbow Cycling Apparel: http://bit.ly/KitsbowJKW
Kali Protectives: http://bit.ly/KaliJKW
Wilderness Trail Bikes (WTB): http://bit.ly/WTBlocaloam
Ibis Cycles: http://bit.ly/IbisJKW
Trust Performance: http://bit.ly/TrustMessageJKW
Camelbak: http://bit.ly/CamelbakJKW

Check out our podcast! http://bit.ly/KendallVSKendall

~~~~~~~~~~~~

Check out my riding tutorials: https://www.patreon.com/jeffkendallweed

www.jeffkendallweed.com
https://www.instagram.com/jeffkendallweed/
https://www.facebook.com/jeffkendallweedMTB/

Leave a Reply Cancel reply